If you need an effective hardwiring solution, the Power Magic Pro is the #1 choice.
Explore the benefits of using Parking Mode in your car with your BlackVue dash cam. Parking Mode is enabled by hard-wiring your dash cam into your car, giving it power once your car is switched off. When Parking Mode is on, the cameras will provide enhanced security by recording anything that happens when you’re not there.
Increased Vehicle Security Record Hit & Run Incidents Catch & Record Suspicious Activity
Parking Mode Switch ON: Power Magic Pro supplies your BlackVue with power even if the ignition of the vehicle is turned off, until it reaches voltage cut-off or timeout value.
Parking Mode Switch OFF: Power Magic Pro supplies power to your dashcam only when vehicle ignition is on. This setting will put not strain on the vehicle's battery.
Professional installation is recommended for installing the BlackVue Power Magic Pro into your vehicle. In order for the PMP to function correctly, it must be hard-wired into an ignition (+) circuit, a battery (b+) circuit and a ground (-) circuit.
Most of our suppliers offer or can recommend a quality installer that can install this system for you, and hide your dash cam’s cables for a completely discreet installation.
POWER MAGIC PRO
Output Voltage Restoration
Cut-off voltage + 0.2V and higher
Rated current 1A, max. 2A / under 200µA
Output Voltage Cutoff Timer
6 Hours ~ 120Hours
~ Infinity (always on)
12.0V or 12.5V (±0.1V)
22.8V or 23.2V (±0.2V)
Note: 12.5V is recommended for optimal battery health, but may result in less Parking Mode recording times. This is due to the camera turning off sooner, as your car will reach 12.5V before it discharges down to 12.0V while stationary.
Note: The BlackVue X series does NOT require a Power Magic Pro.
12 Months Australian Warranty
Rated output voltage
Place of Manufacture
Made in Korea